breadcrumb img

MS2 Dehumidifier Micro Switch with Protection Function

  • MS2 Dehumidifier Micro Switch with Protection Function
  • MS2 Dehumidifier Micro Switch with Protection Function
  • MS2 Dehumidifier Micro Switch with Protection Function
  • MS2 Dehumidifier Micro Switch with Protection Function
  • MS2 Dehumidifier Micro Switch with Protection Function
  • MS2 Dehumidifier Micro Switch with Protection Function

MS2 Dehumidifier Micro Switch with Protection Function

Model: MS2 Micro Switch

MS2 Micro Switch
Customized for vibration environment, special large differential stroke
Used in transmission motors, hospital beds, vacuum cleaners, etc.
In a dry and dusty environment, the dustproof mechanism at the button can be added.

Our certification
products have passed UL, CUL, SEMKO, DEMKO, CE and other domestic and foreign safety certifications, and obtained ISO9001 quality management system certification.
 
Contact Us Quick Inquiry
Internal configuration drawing

Circuit illustration

Mounting hole dimensions

MS2 Micro Switch



MS2 Dehumidifier Micro Switch with Protection Function
The micro switch is used to control the on/off operation of the dehumidifier. When the humidity sensor detects that the ambient humidity exceeds the set value, the microswitch will automatically open and start the dehumidifier working. When the humidity drops below the set value, the microswitch will automatically close and stop the dehumidifier working. This can effectively control the operation of the dehumidifier to avoid too low or too high humidity.                                                                                                                                                                                   
Item Value
Operating speed 1mm~1m/s(No lever)
Operating frequency Mechanical 60 cycles/min; electrical 25 cycles/min
Insulation resistance ≥100mΩ(500VDC)
Contact resistance  ≤50mΩ
(Test voltage) Between no connect terminals of the same polarity AC1000V , 50/60Hz , 1min
(Test voltage) Between current-carrying metal parts and
ground (case),and between each terminal and non-current-carrying metal parts		 AC1500V , 50/60Hz , 1min
Vibration resistance 10-55Hz , 1.5mm Double amplitude
Shock resistance Endurance : 1000m/s2(approx.100G)max
Wrong action : 300m/s2(approx.30G)max
Electric shock proof protection degree II class
Case protection degree IEC IP60 (Specific specification)
Life Mechanical ≥ 1,000,000 cycles
Electrical≥50,000 cycles
Safety approvals UL ,CUL ,TUV, SEMKO, CE 

Recommend Products